Milled Glass Fiber for Tetrafluoroethylene Resin

Model NO.: XGFT9300
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 50micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 5.5:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
Model NO.: XGFT9300
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 50micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 5.5:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
Milled glass fiber for tetrafluoroethylene resin is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.

SPECIFICATIONS:
Model: XGFT9300
Color: white
Glass type: E-glass
Mesh: 300
Fiber Diameter 9micron
Average Fiber Length 50micron
Aspect Ratio 5.5:1
Bulck Density 0.63g/cc
Moisture Content <0.2%
Loss of Ignition <0.2%
Alkali content/R2O(%) ≤0.80
Sizing NO

PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.

STORAGE:
The Low leis point milled glass fiber should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
 
PACKAGING:
Milled Glass Fiber for Tetrafluoroethylene Resin

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.


PRODUCT DETAIL IMAGES:
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled glass fiber for tetrafluoroethylene resin is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.

SPECIFICATIONS:
Model: XGFT9300
Color: white
Glass type: E-glass
Mesh: 300
Fiber Diameter 9micron
Average Fiber Length 50micron
Aspect Ratio 5.5:1
Bulck Density 0.63g/cc
Moisture Content <0.2%
Loss of Ignition <0.2%
Alkali content/R2O(%) ≤0.80
Sizing NO

PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.

STORAGE:
The Low leis point milled glass fiber should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
 
PACKAGING:
Milled Glass Fiber for Tetrafluoroethylene Resin

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.


PRODUCT DETAIL IMAGES:
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin
Milled Glass Fiber for Tetrafluoroethylene Resin

Hejian Deris Both manufacturer and distributor, specialize on roller cones include MT and TCI two type of welding type roller cones, Rectangular leg cones , replacement cones, Tricone Bit cutters ,roller cone of tricone bit used for make Hole Opener and Core Barrel . Drilling water well ,Trenchless / non-dig Non-excavation power and fiber optic pipelines and horizontal directional drilling .General size 8 1/2" tricone bit cones

Feature
♥ Cutting Structure :
  The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit;
♥ Gauge Structure:
   Multiple gauge protection with gauge trimmers on the heel of cone ,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
♥ Bearing Structure :
   High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver -plated. Abrasion resistance and seizure resistance
of the bearing are improved.

Roller Cone Bit

Roller Cone Bit,Single Roller Cone Bit,Roller Cone Bit For Jack Hammer,Customized Roller Cone Bit

Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , http://www.welldrillingbit.com